1. It is not possible to use the 5GWiFi network. It needs to operate at 2.4 GHz network frequency.
2. Mobile phones need to be operated with WIFI
3. Local WiFi connection recommendation should not exceed 10 devices
4. When installing, you need to give the mobile APP network location permission.
5. Printers need to be connected in a good network environment (mobile WIFI interface can be used to check whether the network environment is generally above)
6. WiFi name cannot be used in Chinese
7. If you have any questions about the printer, please contact us. Our email address is：support@weedo3d.com

You can also use the Wiibuilder to set the IP for your printer.

Step1: After the computer is connected to the 2.4G network, open the Wiibuilder,choose “TINA2”printer.

Step2: Click “WLAN Connection”-“WiFi Profile”.



Step3: Enter your network password，click “Save”, save to TF card.


Step4: Turn on the 3D printer，print“wifi.gcode”.


Step5: After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen.

Step1:Download this “.gcode”
wifi.gcode_11.08.51.zip

Step2: Enter your home 2.4G network name and network password, save to TF card.



Step3: Turn on the 3D printer，print “wifi.gcode”.


Step4: After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen.

Step1: Download the Andriod APP-Poloprint for the first time.
poloprintpro1.1.1-1019.apk.zip

Step2: Search the network for the corresponding serial number.



Step3: After the download is completed, the installation is completed.Open the APP，click“Printer wifi Setting”,enter your home 2.4G network name and network password


Step4: Restart the machine. After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen.