You have purchased our Independent Dual Extruder 3D printer X40 . Here is the method to Connect Printer to Cura
If you still have questions, please contact our customer service. Email:salesservice@wiibooxtech.com

Step1: After configuring the network through the web page or Wiibuilder, obtain the IP address.（See “Set Up Wi-Fi Network” ）


Step2: Open the Cura(weedo). Click“Manage printers”, add “X40”.




Step3: Click“Connect OctoPrint ”,enter the IP address, and take a name. Click“Ok”.




Step4: Click“Connect ”, start to “MONITOR”.

Step1: Connect the printer and computer with a USB cable.

Step2: You need to download the CH340 driver (on the download page) for the first connection.


Step3: Open the Cura(weedo). Click“Manage printers”, add X40




Step4: Start to “MONITOR”.