You have purchased our Independent Dual Extruder 3D printer X40 . Here is the method to Connect Printer to Wiibuilder
If you still have questions, please contact our customer service. Email:support@weedo3d.com

Step1: After configuring the network through the web page or Wiibuilder, obtain the IP address.（See “Set Up Wi-Fi Network” ）


Step2: Open the Wiibuilder. Click“WLAN Connection”, enter or choose the IP address, click“Connect”.

Step1: Connect the printer and computer with a USB cable.

Step2: You need to download the CH340 driver (on the download page) for the first connection.


Step3: Open the Wiibuilder. Click“WLAN Connection”,choose “COM3”for Windows or “/dev/*” for MacOS, click “Connect”.

1. It is not possible to use the 5GWiFi network. It needs to operate at 2.4 GHz network frequency.
2. Please turn off VPN.
3. Please turn off Windows firewall settings, make sure the 3D printer and computer are the same subdomain.
4. Mobile phones need to be operated with WIFI.The 3D printer and phones need to use the same subdomain.
5. Keep the TF card inserted.
6. WiFi name cannot be used in Chinese